How To Set Sprinkler Heads

Download Article

Learn how to alter the angle, menstruation, and settings on your sprinkler heads

Download Commodity

Yous should test and suit sprinkler heads at the beginning of spring to ensure they're functioning at their highest level. If your sprinkler is not upwardly to par, information technology can waste matter water and cause dry out spots in your lawn. Fortunately, yous can adjust a broken sprinkler speedily and take information technology dorsum to normal in minutes!

1. i

   Turn the sprinkler on to come across what adjustments yous need to make. Check the sprinkler for water distribution and see if it'southward missing parts of your lawn. Make certain to accept the water source at the level y'all'd set information technology to if you were actually watering your backyard. Observe how much coverage your sprinkler is providing before making your adjustments.^[ane]

   • Give the sprinkler a few minutes until you're sure you've seen how it covers the grass.

   Tip: Keep the sprinkler on during the adjustment catamenia to figure out the result efficiently.

2. 2

   Adjust the arc clockwise to reduce the corporeality of water coverage. Grab the edge of the nozzle with your pollex and forefinger and turn information technology to the right to reduce the arc of water. Make this adjustment to water one specific section of your lawn.^[ii]

   • By turning the arc clockwise, yous're reducing the sprinkler arc and allowing the sprinkler to focus on a smaller section of your lawn.

   Advertisement

3. three

   Twist the arc counter-clockwise to up the amount of h2o coverage. If you want your sprinkler to cover both sides of your lawn, plough the nozzle caput to the left. Place your thumb and forefinger on the nozzle caput and twist information technology until you get a full fan-like arc.^[three]

   • The arc measures how wide the spray goes.

4. four

   Plough the screw in the nozzle head clockwise to reduce the radius. The radius measures how far the water sprays from the sprinkler itself. To conform it, use a flathead screwdriver and insert into the screw in the center of the nozzle. Turn the screw to the right to shorten the spray distance.^[iv]

   • By shortening the spray altitude, y'all can water the grass right in forepart of your sprinkler more completely.

5. five

   Turn the spiral counter-clockwise to increment the radius. If you lot want to water a patch of grass that's far away from your sprinkler, place the flathead screwdriver in the screw and twist it to the left. The more times you lot twist the screwdriver, the farther the spray will travel.^[5]

   • Once you're unable to twist the screwdriver, yous've reached the sprinkler'southward radius limit.

Advertising

1. 1

   Install the wrench into the raised arrow to suit the spray. Your rotor head sprinkler should come with a 2-sided adjustment wrench. The Allen wrench side is used to adjust the spray radius. Find the raised pointer on acme of the spray nozzle and place the Allen wrench inside of it. Spin the wrench clockwise to decrease the spray radius.^[half-dozen]

   • There's a hole next to the raised pointer. This is where the Allen wrench goes.

2. 2

   Plow the wrench counter-clockwise to increase spray. To increment your sprinkler coverage, put the Allen wrench inside the hole by the raised arrow and twist information technology to the left to go a longer spray. Make this adjustment when you need to water plants that are a few feet away from your sprinkler head.^[vii]

3. iii

   Insert the other side of the wrench into the nozzle head to adjust the arc. The other side of the wrench is called the "Plastic T". Information technology goes into the other hole on top of the nozzle head. This hole has a plus and minus sign next to it. When you insert the Plastic T, spin it slightly so information technology sits flush in the pigsty. Spin the wrench to the plus-side to increase the sprinkler's coverage.^[8]

   • To decrease the sprinkler's coverage, spin the wrench to the minus-side.

Advertisement

1. ane

   Turn the water flow upwardly or down to bear upon the spray distance. This is the easiest manner to adjust how far your sprinkler sprays. Twist the knob of your water source to the right to increase the water flow. Plough it to the left to decrease h2o menstruum.^[9]

   • The knob for the water source should be located on your back porch.

2. 2

   Adjust the diffuser screw-in to shorten the spray distance. The diffuser screw-in is a smash located on the side of your impact sprinkler. To twist it, agree the sprinkler head with your offhand and plow the diffuser screw-in to the right to lower the spray distance.^[ten]

   • To increase the spray distance, twist the screw-in to the left.

3. 3

   Employ the deflector shield to adjust the arc of the water. The deflector shield is a apartment piece of metal that sits only higher up the diffuser screw-in. To lengthen the water distance, keep the deflector shield up as high as it tin sit down. To shorten the distance, push button the deflector shield downward a few notches.^[11]

   • The further you pull the deflector shield down, the more than the water altitude lowers.

4. 4

   Flip the trip pin upward to become a total 360-degree spray design. The trip pivot is a piece of metal that sits on the side of the impact sprinkler. It has a thin height and is bent in the middle. To create a 360-spray pattern, flip it up and snap it into place.^[12]

   • A 360-spray pattern allows you to relax while your sprinkler waters your yard for you lot.

Advertisement

Add New Question

• Question

  The sprinkler keeps moving away from pointed spray area, does not stay yet, no affair how many times it is corrected.

  

  Addison Smith

  Community Reply

  The sprinkler knob might need tightened. If it is loose, the water pressure level tin can alter its position.

Ask a Question

200 characters left

Include your email accost to become a bulletin when this question is answered.

Submit

Advertisement

Thanks for submitting a tip for review!

Nigh This Article

Thanks to all authors for creating a folio that has been read 38,882 times.

Did this article help you lot?

Source: https://www.wikihow.com/Adjust-Sprinkler-Heads

Share this post